OSRAM2 STYLE D1 / D3 Ballast (Each)
BALD13O2
- If your Xenon HID system or components are approximately 3 years old or older, we recommend replacing the bulbs, ballasts, and igniters (if not integrated into the bulb or ballast) together. Xenon HID systems are designed to operate as a balanced combination of components. Replacing only one part in an older system can create an imbalance that may reduce performance or shorten the life of the new component.
LUMENS HPL OE Replacement Xenon HID Ballasts provide a direct replacement solution for vehicles equipped with factory Xenon HID lighting. Designed to match the fitment and electrical requirements of the original ballast, they provide a practical way to restore proper operation when a factory ballast has failed. Each application-specific ballast uses digital ballast technology and is designed to operate at the appropriate input and output power for the original Xenon HID system. Factory-style connectors and mounting points allow installation without modifying the vehicle's original wiring or headlamp assembly. Available for a wide range of vehicle applications, LUMENS HPL OE Replacement Ballasts are designed for straightforward replacement by removing the original ballast and installing the corresponding LUMENS HPL unit.
Features:
- Substantial savings with LUMENS HPL vs original ballast from the dealership without sacrificing quality
- Plug and Play: Direct 1 to 1 replacement of original equipment
- Input Voltage DC (Max): 16 V
- Input Voltage DC (Min): 9 V
- 10R-034663
- 10R-0413266
- 10R-044663
- 20928264
- 22794558
- 35XT52D1/12V
- 35XT6-A-D3
- 35XT6-B-D3/12V
- 35XT6-E-D3/12V
- 35XT6-S-D3
- 68250629AA
- 83110009044
- 92101-4Z100
- 92190-B1110
- A71154400DG
- AA3261300DG
- C2D50948
- F1EZ-13C170-A
- FT4Z13C170A
- LR025157
A 1 Year Limited Warranty applies only when all required HID system components are purchased together in a single sales transaction. Required components include HID bulbs, ballasts, and igniters where applicable. Igniters are not required when integrated into the bulb or ballast.
All required installation components identified by the LUMENS HPL Vehicle Lookup System, including harnesses, resistors, bulb adapters, and other application-specific components, must also be purchased and installed. Proof of purchase is required.
All new HID system components must be installed together. Mixing new and used components, replacing individual components only, or omitting required installation components is not covered under this warranty. HID components degrade over time and are designed to operate as a matched system. Mixing new and worn components may cause premature failure and is not covered under this warranty.