1. Power Consumption - Lumens High Performance Lighting LED bulbs draws substantially less power than it's incandescent counterparts

2. Speed - LEDs light up faster than incandescent bulbs

3. Clear Crisp Colors - Get true clean colors with LEDs.

4. Cool Factor - With newer vehicles equipped with LED lighting, give your vehicle that new up to date look with an LED conversion.

Direct replacement LED bulbs. Available in White, Red, and Amber. 360 Degree coverage of LEDs allow for even light distribution and ability for light housing to reflect light generated by bulbs. With the use of 5050 type SMD LEDs, these bulbs are unmatched when it comes to 'dollars to brightness'. For product codes, append color code behind listed code (W = White, R = Red, A = Amber). Not recommended for use as signal lights, as the flashing rate will increase. To decrease the flash rate back to normal, use our LED Resistors or LED Flasher Relays. Our bulbs uses constant current technology to provide the cleanest power possible for the LEDs chips; this in turn provides better consistency in color, and longer overall life on the bulbs. Most of our bulbs are also dual polarity now (if doesn't matter which side is positive or negative when installing). This simplifies the install to reduce having to 'flip the bulb around' when installing, and also minimizes lost time in assuming the bulb has failed when it was only put in with the wrong polarity.

Bright LED replacement bulbs that are compatible with CANBUS vehicles. With regular LED bulbs, because they draw less power than it's incandescent counterpart, regular LEDs will cause an error with vehicles equipped with CANBUS electrical systems. LUMENS HPL CANBUS LED bulbs tells the vehicles' computer that nothing has been changed, and proceed as normal. Please note that although these bulbs will trick the vehicle's computer into believing that an incandescent bulb is still there, they will not provide enough resistance for a signal relay to flash normally.

Note:

Lumens ratings based on white coloured bulbs. Rating will be different with coloured bulbs.

For replacement of dual filament miniature bulbs: 1157, 3157, and 7443. First element lights up in White (usually the running lights), and second element lights up either Amber or Red (usually the signal light). For bulbs that switch from white to amber, append WA to the product code. For bulbs that switch from white to red, append WR to the product code. It should be noted that you will need to resolve any hyper flashing issues in order for these bulbs to function properly.

In some instances, you will need additional resistors when swapping from incandescent bulbs to LEDs:

• Vehicles that have CANBUS systems
• Vehicles that have burnt out bulb indicators on dash
• When replacing incandescent indicator / signal bulbs (if the vehicle has a flasher relay, you can avoid using resistors and swap to our LED friendly flasher relays)